Thursday, June 13, 2019

Wireless Network System for an IT Training Centre Essay

Wireless Network System for an IT Training Centre - Essay ExampleThis information is then transmitted with the air with the attend of a transmitter and received at the other end through a receiver and demodulated. Since both transmission and reception of the signals have to be carried pop out at the same signalize, therefore a device known as an Access Point (AP) is used which is a simple transmitter/receiver or transceiver. By assigning different frequencies to different users many users wad access the network simultaneously without interfering. As is evident, the access to a wireless network can be gained only if the users ar having devices which have a wireless facility. These devices such as notebook computers and tablet PCs are widely acquirable in the market and their prices have fallen by large amounts in recent times making them affordable.Depending on the designing technology used wireless fidelitys are mainly of three types. Narrowband wireless LANs, Spread Spectrum wireless LANs and Infrared wireless LANs. Narrowband WLANs, as is understood from the name, use the narrowband signal for communication. Therefore the speeds achieved are low in this case but the problem of interference is greatly cut back as is the case with narrowband signals. The problem of low speeds is solved by the Spread Spectrum WLANs which use wideband signals. The drawback of this technology is that the number of users accessing an access point is lesser and the security is also weaker than Narrowband WLANs. However, in spite of these drawbacks, it is the most widely used technology. The infrared WLANs dont mother many uses as the speeds as well as the range, in this case, is very low. Infrared WLANs are used only when the devices and access points are placed close to each other and when they are in the line of sight. The requirement of devices to be in the line of sight is because RF signals cannot pass through opaque objects.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.